مینی چیلر 11 کیلووات یا سه و نیم تن

خرید
152
1397/02/27

 

Mini Chiller&Heat Pump Unit

Cooling capacity: 8.6 to 51.3 kW


Heating capacity: 9.5 to 58 kW


Outstanding technology: Panels and base frame are made from galvanized steel protected

with polyester powder painting to ensure total resistance to atmospheric agents; Hermetic

scroll type compressor, equipped with the crankcase heater and thermal protection with

thermal overload cut-out and crankcase heater mounted on rubber vibration isolators;

External rotor type axial fans, equipped with single phase direct drive motors, low noise 6

poles, protection level IP54; High efficiency and low pressure drop stainless steel (AISI 316)

water exchangers.

Structure

Panels and base frame are made from galvanized steel protected with polyester powder painting to ensure total resistance to atmospheric agents

Compressor

Hermetic scroll type compressor, equipped with the crankcase heater and thermal protection with thermal overload cut-out and crankcase heater mounted on rubber vibration isolators

Axial fan

External rotor type axial fans, equipped with single phase direct drive motors, low noise 6 poles, protection level IP54, provided with a protective outlet grille

Evaporator

High efficiency and low pressure drop stainless steel (AISI 316) water exchangers, with anti-freeze heating element (option) and differential pressure switch, factory insulated with flexible close cell material

Coils are consisting of seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins, 100% fully quality tested; sub cooling circuit to prevent freezing at the base (optional); protected with metal grill

Desuperheater

High efficiency stainless steel brazed plate heat exchanger, factory insulated with flexible close cell material (optional)

Refrigerant circuit

Copper tube connection with charge valve, filter, sight glass, gas-liquid separator, thermostatic expansion valve, low pressure switch with automatic reset, high pressure switch with manual reset

The heat pump unit is completed also with 4-way valve, liquid receiver and one way valve

Water circuit

Built with air vent valve, water drain connection, and female-threaded hydraulic connectors

Water pump (8kW-30kW), differential pressure switch

Expansion tank (8kW-30kW)

Electric panel

Consists of:

Compressor contactor

Compressor protection breaker

Fan motor protection breaker

Control circuit protection breaker

Phase sequence relay (only for 3-phase)

Programmable microprocessor controller

Optional

Additional electric heater embedded in the coils for defrosting in low temperature ambient. It must be factory installed

Stainless steel covering

Remote condenser

Tube in tube heat exchanger

Water circuit electric heater

 

 

LARKE Mini Chiller 11kw- Copeland R22

MC-MIAW-11

 

Compressor qty

 

1

Power

V-Ph-Hz

220~240,1,50

Cooling

cooling

KW

11

input power

kW

3.77

current

A

16.30

Heating

Heating

KW

11.7

input power

KW

3.81

current

A

16.49

Max input power

kW

4.524

Max input current

A

19.6

Start-up current

A

81.5

Compressor

type

 

scroll

input power

kW

3.53

running current

A

15.25

Axial fan

quantity

Nr.

1

air flow

m3/h

4800

Expansion valve

 

Thermal Type

Noise

dB(A)

60

Water flow

m3/h

1.9

Water pressure drop for evaporator

kpa

33

Dimension (W×H×D)

mm

452×1180×1250

NW/GW

kg

150/180

Wiring diameter

mm2

3×1.5+2×1

in/out water pipe

mm

DN25

 

           Larke Mini Chiller

               11kw

                 Copeland R22

کمپرسوراسکرال کوپلند
پمپ گراندفوس آلمان
اواپراتور صفحه ای
شیربرقی دانفوس آلمان
سیستم کنترلی PLC
سالم سالم. در حد نو
دارای ضمانت دو ساله تمام قطعات
کارکرد 1 الی دو فصل گرمایی که البته بدلیل مشکلات ساختمان، مجبور به تعویض آن شدند.